The last time Hackerfall tried to access this page, it returned a not found error. A cached version of the page is below, or clickhereto continue anyway

Allowing Matlab to Talk to Rust

As part of my PhD I write a lot of Matlab. I am not particularly fond of Matlab but because I need to collaborate and work on older code bases I dont have much choice in the matter. All that aside, sometimes in Matlab youll find that things can get a little slow. In my field of computational electrodynamics this is typically around the time we need to calculate a matrix of inductance contributions with 100 million elements. Because code like this is hard to vectorise we tend to write code in other languages like C to speed up that section of code. In Matlab land this is typically referred to as writing a Mex file. Mex files can be written in C, C++, Fortran and possibly others.

As a fan of Rust I wanted to see what I could do to get Rust and Matlab talking to one another. It took some time to work out how it could all fit together but I have ported one of the older C Mex files to Rust and successfully linked them to Matlab. While I cant share the specifics of that code here I will work through a working example of sending data from Matlab to Rust and back again. Lets get started.

My Setup

Just in case something falls apart with updates this is my current setup:

Step 1 - Writing a static library in Rust

This step is fairly well documented but for completeness I will start from the beginning. I assume you have all of the components above installed and Matlab knows what C compiler you will be using.

So lets create an empty Rust project.

cargo new rustlab
cd rustlab

Open up your Cargo.toml file and add the following lines to the end.



We ask for libc so we can send data between Matlab and Rust, we also declare this project as a library and say we want to build a static library. As it stands we need to create a static library which will be linked to a C file which wraps the Matlab Mex calling interface, more on that later.

Now to write our functions. In this example we will be writing a function which takes two vectors and does an element wise multiplication on their elements. Something Matlab already does, and does quickly, but enough of an example to show the process of getting data sent both ways.

In our Rust code we will be writing two functions. One, which we will call multiply_safe is where we will use only Rust variables and do the actual computation. The other multiply will be a wrapper, and our interface to C which takes C types, populates Rust variables with them, calls our multiply_safe function and then passes the result back as a C type. This way we keep our Rust code and glue separate as much as possible. Allowing us to test our Rust code on its own without having to set up all the glue each time.

Step 2 - A simple function

So lets get going with implementing multiply_safe and writing a simple test to ensure it is doing what we want.

First open up and add the following function to the file:

fn multiply_safe(a : Vec<f64>, b : Vec<f64>) -> Vec<f64> {
    if a.len() != b.len() {
        panic!("The two vectors differ in length!");

    let mut result : Vec<f64> = vec![0f64; a.len()];
    for i in 0..a.len() {
        result[i] = a[i]*b[i];

    return result;

Nice and simple, there should be no surprises here. Because it is good practice we will also write a test to ensure the results are indeed what we expect. Edit the default it_works test to look like the following:

fn it_works() {
    let a : Vec<f64> = vec![1f64, 2f64, 3f64];
    let b : Vec<f64> = vec![3f64, 2f64, 1f64];
    let c : Vec<f64> = multiply_safe(a, b);
    let expected : Vec<f64> = vec![3f64, 4f64, 3f64];

    assert!(c.len() == expected.len());
    for i in 0..c.len() {
        assert!(c[i] == expected[i]);

Now if you run cargo test you should see our test passing. The other thing we now have is a file called librustlab.a in the target/debug folder. It wont do anything right now because we havent written the multiply function but this is were our library will end up.

Step 3 - A C wrapper

Now lets look at the function that makes the link between C and Rust. As I mentioned before we will be writing a C file which acts as a middleman between Matlab and Rust. This is clearly not ideal but in currently it appears to be the most straightforward way to get things working.

Before we write this new function lets add the libc requirements to the top of the file.

extern crate libc;
use libc::{c_double, c_long};

The C function will be passing us double pointers so we use rusts c_double type and c_long to pass the length of the two arrays. Next to create our exported function add the following.

pub extern fn multiply(a_double : *mut c_double, 
                    b_double : *mut c_double, 
                    c_double : *mut c_double,
                    elements : c_long) {
    let size : usize = elements as usize;
    let mut a : Vec<f64> = vec![0f64; size];
    let mut b : Vec<f64> = vec![0f64; size];

    for i in 0..size {
        unsafe {
            a[i] = *(a_double.offset(i as isize)) as f64;
            b[i] = *(b_double.offset(i as isize)) as f64;

    let c : Vec<f64> = multiply_safe(a, b);

    for i in 0..size {
        unsafe {
            *c_double.offset(i as isize) = c[i];

Some things to note here. First up #[no_mangle] this tells rust to keep the function name the same so we can link to it, typically it gets mangled to reduce the risk of two things having the same name. Next pub extern is needed to make sure the function is publicly exported. The last thing worth noting is the unsafe block. We use one of these to mark where potentially unsafe things might happen (like dereferencing pointers). Hopefully the rest of the function is clear enough. Build the code again and we will move on to writing the final piece of the puzzle.

Part 4 - Some C code

Create a new file rustlab.c and add the following code. If you have used the mex interface before it should be pretty straightforward.

#include "mex.h"

// Multiplies a and b element wise, and puts the result in c
extern void multiply(double* a, double* b, double* c, long elements);

void mexFunction(int nlhs, mxArray *plhs[], 
        int nrhs, const mxArray *prhs[]) {
    double* a;
    double* b;
    double* c;

    mwSize elements;

    if (nrhs != 2) {
        mexErrMsgTxt("Wrong number of input args");

    if (nlhs != 1) {
        mexErrMsgTxt("Wrong number of output args");

    a = mxGetPr(prhs[0]);
    b = mxGetPr(prhs[1]);
    elements = mxGetM(prhs[0]);

    plhs[0] = mxCreateDoubleMatrix(elements, 1, mxREAL);
    c = mxGetPr(plhs[0]);

    multiply(a, b, c, elements);

Now that both of these are done, open up Matlab and move to a folder that contains both librustlab.a and rustlab.c. While in Matlab run the following.

mex rustlab.c librustlab.a
a = 1:10;
c = rustlab(a', a');

Woohoo! You did it. Hopefully this made things clear and helps in some way. While I am probably not considered an expert in rust I am happy to help out if you get in touch with me via twitter @smitec.

I plan over time to move more of my mex files to Rust. It offers a lot in terms of safety and high level concepts that can be more difficult to achieve in C.

All of the code related to this post is available on Github: rustlab and so if things are broken on your system feel free to post an issue or pull request.

Continue reading on